Danh mục bài viết: Mã lỗi máy photocopy Toshiba
Tổng hợp mã lỗi/ Error code của 2 dòng máy photocopy Toshiba DP1600, DP1610
Cho thuê máy photocopy toshiba chất lượng cao.
| Mã lỗi/ Code | Mô tả/ Description |
| C01 | Main motor drive error |
| C04 | PFP main motor drive error |
| C06 | LCF feed motor error (DP2000/2500 series) |
| C13 | Cassette 1 error |
| C14 | Cassette 2 error |
| C15 | Cassette 3 error |
| C16 | Cassette 4 error (DP2000/2500 series) |
| C18 | LCF tray error (DP2000/2500 series) |
| C19 | LCF feed motor abnormal (DP2000/2500 series) |
| C21 | Carriage initialization error |
| C25 | Scanner unit watch dog error |
| C26 | Exposure lamp disconnection or peak detection error |
| C38 | Replaced process unit error |
| C41 | Abnormal thermistor or heater disconnection at power ON |
| C43 | Warming up mode after disconnection judgment, or abnormal thermistor after ready |
| C44 | Warming up mode after disconnection judgment, or heater abnormal after ready |
| C45 | Thermistor disconnection at the end part of heater |
| C56 | Communication error between PFC and main unit |
| C57 | Communication error between main unit and IPC (DP2000/2500 series) |
| C58 | Communication error between IPC and finisher (DP2000/ 2500 series) |
| C71 | Paper supply motor lock error |
| C73 | EE-PROM initialization error |
| C74 | Defective adjustment by the exit/reversal sensor detected |
| C81 | Fan motor lock error |
| C82 | Document aligning lower sensor (RADF)/Aligning sensor (ADF) adjustment error |
| C83 | Size length adjustment error |
| C91 | SRAM abnormality (Lithium battery or SRAM chip are abnormal.) |
| C95 | Power supply unit fan motor abnormality |
| C96 | Process unit fan motor abnormality |
| C97 | Vacuum fan motor abnormality |
| C98 | Clock IC abnormality |
| C99 | PFC microcomputer abnormal |
| CA1 | Polygon motor abnormal |
| CA2 | HSYNC abnormal |
| CB2 | Exit motor abnormal |
| CB5 | Staple motor abnormal |
| CC3 | Set processing motor abnormal |
| CC8 | Front aligning motor abnormal |
| CC9 | Upper tray elevator motor abnormal |
| CCA | Lower tray elevator motor abnormal |
| CCB | Rear aligning motor abnormal |
| E01 | Paper jam inside the machine |
| E02 | Paper jam near the fuser unit |
| E03 | Paper remaining inside the machine at power on (Except for ADF/RADF) |
| E08 | Transporting jam inside the ADU |
| E09 | Time out error that occurs at the paper feeding sensor |
| E11 | Paper feeding jam at the ADU |
| E12 | Paper feeding jam at the SFB |
| E13 | Cassette 1 feeding jam |
| E14 | Cassette 2 feeding jam (PFU) |
| E15 | Cassette 3 feeding jam (PFP) |
| E16 | Cassette 4 (CM) feeding jam (DP2000/2500 series) |
| E19 | LCF feeding jam (DP2000/2500 series) |
| E31 | Paper not reach to feed sensor from cassette 2, so paper jam inside the main unit during cassette 2 feed |
| E32 | Paper not reach to feed sensor from cassette 3 or 4, so paper jam inside the main unit during the feed |
| E33 | Paper not reach to feed sensor from LCF cassette. (DP2000/2500 series) |
| E34 | Paper not reach to 2nd cassette feed sensor from cassette 3 or 4. (Cassette 4 is DP2000/2500 series) |
| E35 | Paper jam in cassette 4 transport path (DP2000/2500 series) |
| E36 | Paper jam in LCF transport path (DP2000/2500 series) |
| E41 | Copier front cover or side cover is opened during copying (Copier front cover, side cover, or transport cover of job separator/offset tray/bridge cover is opened during copying) |
| E42 | Side cover of cassette 2 or cassette 3 is opened during copying |
| E43 | ADU is opened during copying |
| E45 | Side cover of LCF is opened during copying (DP2000/ 2500 series) |
| E71 | Original feeding jam at the feeding area of the ADF or RADF |
| E72 | Original transporting jam at the transporting area of the ADF or RADF |
| E73 | Original exiting jam at the exiting area of the ADF or RADF |
| E74 | Original reversing jam at the reversing area of the RADF |
| EA1 | Paper transport delay jam |
| EA2 | Paper transport stop jam |
| EA3 | Paper remaining on the finisher transport path at power ON |
| EA4 | Finisher is opened during copying |
| EA5 | Finisher staple jam |
| EA7 | Set transport jam before stapling |
| EAF | Stapled set transport jam |
| F11 | Scanner I/F error |
| F12 | Write error at downloading the scanner unit program |
| F13 | Download sector error of the scanner unit program |
| F14 | Scanner unit F-ROM error |
| F31 | Modem IC does not work normal |
| F41 | Initial detection error of the offset catch tray |
Có thể bạn nên xem?