Mã lỗi/ Code máy photocopy DP1640, DP1660

Danh mục bài viết: Mã lỗi máy photocopy Toshiba

Tổng hợp mã lỗi code của 2 máy photocopy Toshiba DP1640, DP1660

Code/ Mã lỗi Description/ Mô tả
C01 Main motor abnormality: The main motor is not rotating normally.
C21 Scanning system
CIS unit initialization error
C26 Scanning system
Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON.
C41 Thermistor or heater abnormality at power-ON: Abnormality of service call the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON.
C43 Thermistor abnormality during warming up or in ready status after abnormality judgment
C44 Heater abnormality after abnormality judgment: The temperature of the fuser roller has exceeded the range of control (in this case, the main switch turns OFF automatically) or does not even reach the range.
C45 Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing
C55 ADF I/F error: Communication error has occurred between the ADF and the scanner
C94 Firmware update error: An error message appears when firmware for e-STUDIO166/206 is updated on e- STUDIO163/203 by mistake, and the power is turned OFF and then back ON after the update.
C97 High-voltage transformer abnormality: Leakage of the main charger is detected.
CA1 Polygonal motor abnormality: The polygonal motor is not rotating normally
CA2 H-Sync detection error: H-Sync detection PC board cannot detect laser beams.
E01 Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor.
E02 Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor.
E03 Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.
E09 Jam at the registration area due to registration timeout error
E12 Bypass misfeeding (Paper not reaching the registration sensor): The paper fed from the bypass tray does not reach the registration sensor.
E13 Drawer misfeeding (Paper not reaching the registration sensor): The paper fed from the drawer does not reach the registration sensor.
E14 PFU drawer misfeeding (Paper not reaching the PFU feed sensor): The paper fed from the PFU drawer does not reach the PFU feed sensor.
E21 PFU drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the PFU feed sensor.
E40 Transfer cover open jam: The transfer cover has opened during printing.
E41 Front cover open jam: The front cover has opened during printing.
E44 PFU cover open jam: The PFU cover has opened during printing.
E71 Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor.
E72 Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor.
E73 Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its leading edge has reached this sensor.
E86 ADF jam access cover open: The ADF jam access cover has opened during ADF operation.
E87 ADF open jam: ADF has opened during ADF operation.
F14 Invalid backup counter: The value of the total counter is inconsistent with that of the backup counter

* Gia Văn cung cấp dịch vụ cho thuê máy photocopy hàng đầu tại Tphcm

Có thể bạn nên xem?

« »

Post a Comment

Your email address will not be published.